Advanced Search Results
Refine your search by using the category filter.
Iron Powder, Ultra Pure 99.5%
High-purity fine iron powder made of high-purity iron by the water atomization method. Features an apparent density of >2.8 g/cc with a medium particle size distribution. Suitable for various applications requiring ultra-pure iron.
Product Specifications
| Apparent Density | 3 g/cc |
| HTS# | 7205.21.0000 |
| CAS# | 7439-89-6 |
| Sieve Analysis | +212 µm: 0% 180–212 µm: 2% 150–212 µm: 12% -45 µm: 10–30% |
Chemical Analysis (Typical)
| Fe | 99.5% |
| O-tot | 0.12% |
| C | 0.003% |
| S | 0.010% |
| P | 0.01% |
Applications and Benefits:
- High-purity requirements for industrial or scientific uses
- Applications requiring medium particle size distribution
- Water atomized iron suitable for precise manufacturing
Caution:
Handle in accordance with safety guidelines. Refer to SDS for details.
Laboratory Support Stand with Triangular Cast Iron Base and Steel Rod
This assembly consists of a triangular cast iron base and a vertical plated steel rod, designed to function as a general-purpose laboratory support stand. The base is fabricated from high-mass cast iron to ensure a low center of gravity and high resistance to mechanical tipping. Its three-point geometry provides stable contact with the bench surface, compensating for minor surface irregularities and enhancing overall stability.
The base features a central threaded bore, machined to accept a 13 mm (1/2 in.) diameter rod with standard threading. The rod is composed of plated carbon steel, offering moderate corrosion resistance and sufficient rigidity under typical lab loading conditions. It has a total length of 500 mm (20 in.), suitable for vertical mounting of various laboratory fixtures such as clamps, rings, and holders.
To resist degradation in chemically active environments, the base is coated with a chemical-resistant enamel paint, which provides a protective barrier against spills and vapors encountered in routine laboratory operations.
Product Specifications
| Base Material | Cast iron |
| Base Design | Triangular, three-point contact |
| Base Finish | Chemical-resistant enamel coating |
| Rod Material | Plated carbon steel |
| Rod Diameter | 13 mm (1/2 in.) |
| Rod Length | 500 mm (20 in.) |
| Rod Mounting Interface | Threaded insertion into base (standard threading) |
Applications and Benefits:
- Structural support in laboratory apparatus assemblies
- Vertical alignment for chemical processing setups
- Support for titration and distillation equipment
- Mounting instrumentation in thermal experiments
- Resistant to tipping and surface irregularities
- Corrosion resistance in chemically active environments
Caution:
Threaded connection must be fully engaged before load is applied. Verify mechanical stability before use to ensure safe operation.
Magnetite, Fe₃O₄ (Black Iron Oxide 99%)
High purity synthetic magnetite fine black powder (2-4 µm). This pigment-quality magnetite is known as CI Pigment Black 11 or CI 77499. It is a highly magnetic powder (>99.9% attracts to magnets) that efficiently removes arsenic (As(III) and As(V)) from water. It is widely used as a pigment for art and industrial paints and is suitable for industrial research and scientific experiments.
Product Specifications
| Magnetite (Fe₃O₄) | >99% (Typical: >99%) |
| Hematite (Fe₂O₃) | 0.0–4.1% (Typical: 0.5%) |
| Wuestite (FeO) | 0.0–0.5% (Typical: 0.0%) |
| Trace Elements | 0.2–1.0% (Typical: 0.6%) |
| Particle Size | 2–4 µm |
| CAS Numbers | 1309-38-2, 1317-61-9, 12227-89-3 |
| EINECS | 235-442-5 |
| HS Code | 28211010 |
Applications and Benefits:
- Removes As(III) and As(V) from water
- Pigment for industrial and art paints
- Magnetic powder for research and experiments
- High-purity pigment for scientific use
Caution:
Handle in accordance with safety guidelines. Refer to SDS for details.
Rectangular Cast Iron Support Stand 200 X 125 Mm
This Rectangular Cast Iron Support Stand 200 X 125 Mm is the perfect addition to any home or professional laboratory. With its rugged, stable base and baked enamel finish, this support stand is built to last. The base is rectangular in shape and has an undercoating on the bottom for added stability. Additionally, there is a hole drilled close to the edge for the rod. The support stand comes with a rod that can be easily unscrewed from the base for storage.
This high-quality support stand is not only functional, but it also looks great in any laboratory setting. Whether you are a professional scientist or a student, this support stand is a must-have for all your laboratory needs.
Product Specifications:
| Product Name | Rectangular Cast Iron Support Stand 200 X 125 Mm |
| Type | Support Stand |
| Shape | Rectangular |
| Material | Cast Iron |
| Size | 200 X 125 Mm |
| Base Finish | Baked Enamel with Undercoating |
| Rod | Supplied with Rod that can be Unscrewed for Storage |
| Application | Home or Professional Laboratory |
Similar Products
- Round Cast Iron Support Stand 150mm Diameter
- Rectangular Stainless Steel Support Stand 250 X 150mm
- Adjustable Aluminum Support Stand with Clamp
- Triangle Cast Iron Support Stand 200 X 200 X 200mm
- Rectangular Plastic Support Stand 200 X 125mm
Note: These are similar products, and each product is different, so research is required to find the best fit for your needs.
CAUTION: Keep the support stand away from flammable materials and ensure it is placed on a stable surface to prevent tipping over.
Red Iron Oxide
Red Iron Oxide is an inorganic pigment that is commonly used in a variety of applications. Its purpose is to provide a rich red color to products such as paint, plastics, and ceramics. Ferric Oxide is the chemical name for this pigment, and it is made up of iron and oxygen atoms. This pigment is known for its excellent lightfastness and weather resistance, making it a popular choice for outdoor products. Additionally, Red Iron Oxide has a long history of use in traditional medicine and is believed to have healing properties.
Product Specifications:
| Product Name | Red Iron Oxide, Ferric Oxide, Inorganic Pigment |
| Chemical Formula | Fe2O3 |
| Molecular Weight | 159.69 g/mol |
| Appearance | Red powder |
| Density | 5.24 g/cm? |
| Melting Point | 1538?C |
| Boiling Point | 2750?C |
Caution: This product contains inorganic pigment and ferric oxide which may be hazardous if ingested or inhaled. Use with proper protective equipment and follow handling instructions carefully.
Perfect For:
- Paint manufacturers
- Construction companies
- Artists and craftsmen
- Industrial manufacturers
- Chemical companies
- Cosmetic manufacturers
Soft Magnetic Iron Rod, 5 Mm X 200 Mm (D X L)
The Soft magnetic Iron Rod with dimensions of 5mm x 200mm (D x L) is a versatile and highly useful product for various industries, including electronics, physics, and research. Made from soft, magnetic iron, this rod is for use in applications where strong magnetic fields are required. The rod is packaged individually for convenience.
Product Specifications
| Product Name | Soft Magnetic Iron Rod |
| Dimensions | 5 mm x 200 mm (D x L) |
| Material | Iron |
| SKU | SOFTIR |
| Packaging | Individual packaging |
Applications and Benefits
- Electronics and electrical devices
- Physics and research applications
- Magnetic field experiments
- Manufacturing of electronic devices
Key Features and Benefits
- Soft magnetic material for efficient magnetization and demagnetization
- 5 mm diameter and 200 mm length for versatile use
- Resistant to corrosion and oxidation for long-lasting performance
- Low coercivity for minimal energy loss during magnetization
- Magnetic permeability for enhanced magnetic field strength
Caution:
Handle with care. Soft iron rods can be easily bent or deformed. Keep away from electronic devices and magnetic fields.
Shipping Recommendation:
We recommend the 45 lb and 90 lb packaging options to help minimize shipping costs. The 45 lb and 90 lb options avoids additional handling surcharges based on weight.
SM1001 Soft Magnetic Iron Powder
SM1001 is an ultra-pure soft magnetic iron powder designed for soft magnetic powder metallurgy (P/M) applications. Its primary characteristics include high purity, cleanliness, consistency, and compressibility. SM1001 contains exceptionally low levels of carbon, oxygen, sulfur, and manganese, supporting high magnetic permeability, high induced magnetization, and low coercive force. High-purity virgin raw materials containing low residual elements, combined with clean steel-making practices, provide a high level of powder cleanliness. Statistical process control, pure raw materials, and modern steel-making practices support product homogeneity and lot-to-lot consistency, improving consistency in P/M parts. A single-pressed density up to 7.2 g/cm³ can be achieved, making SM1001 suitable for high-density P/M magnetic parts while reducing tool stress and providing superior magnetic properties.
SM1001 is used in electronic components, magnetic shielding, magnetic materials research, powder metallurgy components, and other applications requiring soft magnetic properties. Its soft magnetic characteristics allow the material to be magnetized and demagnetized readily. High permeability, low coercivity, and low hysteresis loss support efficient magnetic performance.
For customers searching for SMALLOY or other Soft Magnetic Composite (SMC) materials, SM1001 is the closest in-stock product available. SMALLOY is a custom-produced SMC product system supplied by special order with a minimum order quantity (MOQ) of 5,000 lbs. SM1001 differs from coated SMC materials because its iron particles are uncoated. As a result, SM1001 is intended for cold casting soft magnetic products rather than applications that specifically require individually coated SMC particles.
SM1001 is suitable for manufacturing companies specializing in magnetic materials, research and development departments in the electronics industry, engineers and scientists working with magnetic materials, industrial designers developing products requiring magnetic properties, academic institutions studying magnetic materials, and other users requiring high-purity soft magnetic iron powder.
Product Specifications
| Chemical Name | Iron |
| CAS Number | 7439-89-6 |
| Molecular Formula | Fe |
| Material Type | Soft magnetic iron powder |
| Grade | Ultra-pure soft magnetic P/M grade |
| Iron Content | 99.4+ wt% |
| Carbon | 0.004 wt% |
| Oxygen | 0.06 wt% |
| Sulfur | 0.009 wt% |
| Manganese | 0.04 wt% |
| Particle Size Analysis | +60 mesh (+250 µm): Trace; +100 mesh (+150 µm): 14%; +325 mesh (+45 µm): 66%; -325 mesh (-45 µm): 20% |
| Apparent Density | 2.92 g/cm³ |
| Flow | 25 sec/50 g |
| Pressed Density | Up to 7.20 g/cm³ at 600 MPa (43.5 tsi) |
| Magnetic Characteristics | High magnetic permeability, high induced magnetization, low coercive force, and low hysteresis loss |
| Particle Coating | Uncoated iron particles |
| Processing | Suitable for cold casting soft magnetic products |
| Synonyms | Soft iron powder; Soft magnetic iron; Soft magnetic iron powder; Magnetic iron powder; High-purity iron powder; Elemental iron powder; Iron metal powder; Powder metallurgy iron; P/M iron powder; Ferrous powder |
Applications and Benefits:
- Soft magnetic powder metallurgy components
- High-density P/M magnetic parts
- Cold casting of soft magnetic products
- Electronic components requiring soft magnetic properties
- Magnetic shielding applications
- Magnetic materials research and development
- Products requiring controlled magnetic properties
- High magnetic permeability
- High induced magnetization
- Low coercive force
- Low hysteresis loss
- Improved P/M part consistency
- Reduced tool stress during compaction
- Superior magnetic properties
- Product homogeneity and lot-to-lot consistency
- Easy magnetization and demagnetization
- In-stock alternative for customers searching for SMALLOY where uncoated iron powder is suitable for the intended application
Caution:
SM1001 consists of uncoated iron particles and should not be treated as a direct substitute for coated Soft Magnetic Composite materials in applications that require electrically insulated particles. SM1001 is intended for cold casting soft magnetic products. Handle using appropriate industrial safety procedures and minimize airborne dust. Use suitable personal protective equipment and ventilation as required. Consult the current Safety Data Sheet before handling, processing, storage, or disposal.
Shipping Recommendation:
We recommend the 45 lb and 90 lb packaging options to help minimize shipping costs. The 45 lb and 90 lb options avoids additional handling surcharges based on weight.
Steel Powder, Iron Powder (S1001)
S1001 is a highly compressible, water-atomized steel powder designed for high-density, high-strength powder metallurgy (P/M) and powder forging applications. Its superior compressibility allows single pressing to 7.2 g/cm³ and repressing to densities up to 7.4 g/cm³, enhancing the performance of P/M parts. The powder offers enhanced compaction capability, resulting in higher strength and density. S1001 is suitable for sintering, cold casting, filler metal applications, and advanced 3D printing processes such as Selective Powder Deposition (SPD).
Specifications
| Category | Iron Powder, Metal Powder, Filler Metal |
| Compressibility | Single press to 7.2 g/cm³, repress to 7.4 g/cm³ |
| Particle Size (Sieve Analysis) | +60 Mesh (250 µm): Trace -60/+100 Mesh (150–250 µm): 10% -100/+140 Mesh (105–150 µm): 17% -140/+200 Mesh (75–105 µm): 20% -200/+325 Mesh (45–75 µm): 25% -325 Mesh (<45 µm): 28% |
| Carbon (C) | Max 0.010% |
| Oxygen (O) | Max 0.15% |
| Sulfur (S) | Max 0.014% |
| Manganese (Mn) | Min 0.150% - Max 0.220% |
Applications and Benefits:
- Powder metallurgy for high-density, high-strength parts
- Powder forging with superior compaction capabilities
- Sintering and cold casting applications
- Filler metal for welding and repairs
- 3D printing using Selective Powder Deposition (SPD)
Caution:
Handle with care. Review the Material Safety Data Sheet (MSDS) for safety and handling instructions.
Steel Powder, Iron Powder, Coarse, Dense
S3001 is a coarse, high-purity atomized iron powder specifically designed for welding and alloying applications. With its dense, larger particles, S3001 minimizes dust production and ensures solid joint formation. Used as a filler metal, it significantly improves metal deposition rates and productivity. By leveraging the excess heat from arc welding, additional filler material can be melted, enhancing deposition without increasing arc energy. This coarse metal powder is ideal for industrial applications requiring high-density iron powder.
Specifications
| Category | Iron Powder, Metal Powder, Filler Metal |
| Apparent Density | 3.00 g/cm³ |
| Flow Rate (Hall) | 37 seconds/50g |
| Iron (Fe) | >99% |
| Carbon (C) | 0.005% |
| Oxygen (O) | 0.120% |
| Sulfur (S) | 0.008% |
| Phosphorus (P) | 0.010% |
| Manganese (Mn) | 0.180% |
| Silicon (Si) | 0.015% |
| Chromium (Cr) | 0.050% |
| Vanadium (V) | 0.005% |
| Titanium (Ti) | 0.001% |
| Calcium (Ca) | 0.001% |
Typical Screen Analysis
| U.S. Mesh | Microns | Wt % |
| +30 | >600 | Trace |
| -30 +40 | >425 | 2 |
| -40 +100 | >150 | 95 |
| -100 | <150 | 3 |
Applications and Benefits:
- Filler metal for welding and alloying
- Enhances metal deposition rates
- Minimizes dust production and ensures solid joints
- Ideal for arc welding and industrial metalwork
Caution:
Handle with care. Review the Material Safety Data Sheet (MSDS) for safety and proper handling instructions.
Steel Powder, Iron Powder, Mesh 100
Coarse steel powder, mesh 100, is produced from recycled black steel (construction steel). It demonstrates strong magnetic attraction, high flow rate for dispensing from shakers, and is free from organic impurities such as cutting oils. This versatile iron powder is clean and preferred by educators for use in science experiments. It is also widely used for creating rust effects in sculptures and concrete, as well as a source of iron as a plant nutrient.
Specifications
| Material Source | Recycled black steel (construction steel) |
| Mesh Size | Mesh 100 |
| Magnetic Properties | Strong magnetic attraction |
| Organic Impurities | None |
| Carbon | 0.8% - 1.2% |
| Manganese | 0.35% - 1.2% |
| Silicon | 0.4% Minimum |
| Sulfur | 0.05% Maximum |
| Phosphorus | 0.05% Maximum |
Applications and Benefits:
- Used as iron filing for magnetism and electromagnetism experiments
- Preferred by educators for clean and contamination-free experiments
- Creates rust effects in sculptures, concrete, and structures
- Used as a plant nutrient for iron supplementation
- Strong magnetic properties for science and industrial applications
Caution:
This product is made from recycled steel and may rust over time. Handle with care. Review the Material Safety Data Sheet (MSDS) for proper handling and safety precautions.
Super Fine Iron Powder, Atomized
Super fine atomized iron powder with solid-dense, free-flowing particles. At least 95% of the particles pass through a 45-micron sieve (mesh 325). This high-purity iron powder is ideal as a filler for rubber, plastics, and resins, providing weight, magnetic properties, and metal detection capabilities. Safe for food contact and cosmetic applications, it also finds use in magnetic pigments, powder metallurgy, sintered products, magnetism experiments, forensic products, and magnetic paints. IRON325ZV is specifically suited for cold casting delicate, high-precision objects and applications such as MIM (Metal Injection Molding) and P&S (Press & Sinter). Additionally, it is used in tension control devices, including magnetic clutches and brakes.
Specifications
| Chemical Formula | Iron (Fe) |
| Purity | >99% |
| Carbon | 0.006% |
| Oxygen | 0.08% |
| Sulfur | 0.008% |
| Apparent Density | 2.9 |
| Typical Particle Size | 150 microns: 0% 106-150 microns: 0% 75-106 microns: 0% 45-63 microns: 2.6% 38-45 microns: 25.5% -38 microns: 71.9% -45 microns: 97.4% |
| HTS# | 7205.21.0000 |
| CAS# | 7439-89-6 |
Applications and Benefits:
- Filler for rubber, plastics, and resins
- Magnetic pigments and paints
- Food contact and cosmetic applications
- Powder metallurgy and sintering
- Soft magnetic composite compounds
- Chemical reactions and magnetism experiments
- Forensic products
- Cold casting delicate, high-precision objects
- Tension control devices like magnetic clutches and brakes
Caution:
This product is not tested or approved for human consumption or iron fortification. Handle with care and review the Material Safety Data Sheet (MSDS) for proper use.
Super Fine Iron Powder, Atomized, High Purity
Super fine high-purity atomized iron powder with dense, free-flowing particles passing through a 45-micron sieve (mesh 325). This powder serves as a versatile filler for rubber, plastic, and resins, providing weight, magnetic properties, and metal detection capabilities. It is FDA-compliant for food contact applications and suitable for use in cosmetics. Additional applications include magnetic pigments, sintered products, powder metallurgy, chemical reactions, soft magnetic composite compounds, magnetism experiments, forensic products, and magnetic paints. IRON325AT is particularly suitable for cold casting high-precision small objects and MIM (Metal Injection Molding) or P&S (Press & Sinter) applications.
Specifications
| Chemical Formula | Iron (Fe) |
| Purity | 99+% |
| Carbon | 0.001% |
| Oxygen | 0.08% |
| Sulfur | 0.006% |
| Phosphorus | 0.001% |
| Apparent Density | 3 or higher |
| Typical Particle Size | +200 Mesh (75 microns): Trace -200 +325 Mesh (45 microns): 3% -325 Mesh: 97% |
| HTS# | 7205.21.0000 |
| CAS# | 7439-89-6 |
Applications and Benefits:
- Filler for rubber, plastic, and resins
- Magnetic pigments and paints
- Food contact and cosmetic applications
- Powder metallurgy and sintering
- Soft magnetic composite compounds
- Chemical reactions and magnetism experiments
- Forensic products
- Cold casting delicate, high-precision objects
Caution:
This product conforms to FDA 177.2600A-H and is safe for food contact. Handle with care. Review the Material Safety Data Sheet (MSDS) for safety and handling instructions.
